Miele G 7166 - Door Release

Frequently asked questions
85
Door release
Problem Possible cause and solution
The in-operation indica-
tor light is flashing
quickly.
The alarm tone is
sounding.
The following fault is in-
dicated via the display:
Before remedying the fault:
 Turn off the dishwasher.
Door fault The door does not open automatically.
There may be a technical fault.
 Open the door manually (see “Opening the door”
under “Before using for the first time”) and turn the
dishwasher back on again.
 If the same fault message appears again, contact
Miele Customer Service.
The door locking pins do not retract after the door is
opened.
There may be a technical fault.
 Turn the dishwasher back on.
 If the same fault message appears again, contact
Miele Customer Service.