Frequently asked questions
97
Problem Possible cause and solution
There are rust stains on
the cutlery.
The affected items are not corrosion resistant.
No remedy.
Purchase cutlery which is dishwasher-proof.
A program was not run after reactivation salt was
added. Traces of salt have got into the normal wash
cycle.
Always run the QuickIntenseWash program
with the Express program option selected and
without any dishes in the dishwasher after adding
reactivation salt.
The salt reservoir cap has not been screwed on cor-
rectly.
Replace it, making sure that it screws back on cor-
rectly.
To Next Page
Loading...
