Frequently asked questions
102
Spray arm fault
Problem Possible cause and solution
During the program and
at the end of the pro-
gram, the display shows
the following message:
Check spray arms
The dishwasher does
not turn off at the end
of the program.
The dishes may not be
clean because no deter-
gent was dispensed.
The AutoDos func-
tion is automatically de-
activated during the
program sequence.
The lower spray arm is blocked or the nozzles of the
lower spray arm are clogged. The AutoDos func-
tion is automatically deactivated during the program
because the AutoDos detergent outlet cannot be
completely flushed out.
Turn the dishwasher off and back on again.
Messages appear in the display.
Perform a rotation check of the lower spray arm
and rearrange the wash items if they are blocking
the spray arm.
Clean the lower spray arm (see “Cleaning the
spray arms” under “Cleaning and care”).
Select OK to confirm each message.
Start the program again.
To Next Page
Loading...
