Miele G 7714 - Ecostart

Settings
44
EcoStart
In order to run your dishwasher in the
most economical way, you can use the
EcoStart option to take advantage of
your electricity supplier’s cheaper
energy tariffs (see “Options - Timer”).
With this option selected, your
dishwasher will start automatically at
your electricity supplier’s cheapest rate
times.
To use this option, you must first set up
to three electricity rate tariff times in
which the dishwasher can start. You can
allocate different priorities to these tariff
times. The time with the cheapest
electricity rate will be given Priority 1.
Contact your energy supplier to find out
the times of the cheapest electricity
rates.
Once the electricity rate times have
been set, you can use the EcoStart
option to set the latest finish time
required for each programme.
The dishwasher will then start
automatically during the cheapest
energy rate time period. The programme
will end at the set finish time at the
latest.
Setting the electricity tariff times
Before you can use the EcoStart option,
you must set at least one electricity
tariff time.
 Use the sensors to select an
electricity tariff time T1 to T3 and
confirm with OK.
The start of the electricity tariff time
selected will appear in the display and
the hour number block will be
highlighted.
 Use the sensors to set the hour
and minutes for the start time and
confirm both with OK.
The end of the electricity tariff time
selected will appear in the display and
the hour number block will be
highlighted.
 Use the sensors to set the hour
and minutes for the finish time and
confirm both with OK.
The electricity tariff time will be saved
and its priority will appear in the display.
 Use the sensors to set the
priority you want and confirm with
OK.
 Confirm the message with OK.
The electricity tariff time will be
activated.