EasyManua.ls Logo

Miele G 7855 User Manual

Miele G 7855
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operating instructions
Commercial dishwasher
G 7855
To avoid the risk of accidents or
damage to the machine it is
essential to read these operating instructions
before it is installed, commissioned and used for the
first time.
G i
M.-Nr. 05 234 481

Other manuals for Miele G 7855

Question and Answer IconNeed help?

Do you have a question about the Miele G 7855 and is the answer not in the manual?

Miele G 7855 Specifications

General IconGeneral
BrandMiele
ModelG 7855
CategoryDishwasher
LanguageEnglish

Summary

Description of the Machine

Guide to the Machine

Warning and Safety Instructions

Correct Use

Defines the intended commercial use and restrictions for the machine.

Using Accessories

Guidelines for using genuine Miele accessories with the machine.

Disposal of Your Old Machine

Instructions for safely and environmentally disposing of the old appliance.

Caring for the Environment

Disposal of Packing Material

Guidance on environmentally friendly disposal and recycling of machine packaging.

Disposal of Old Appliance

Proper disposal procedures for electrical and electronic appliances.

Before Using for the First Time

Load the Machine Carefully

Instructions on arranging items for optimal water contact and avoiding obstructions.

Set the Water Softener Unit

Guide to adjusting the water softener based on local water hardness levels.

Add Rinsing Agent

Instructions on filling the rinsing agent reservoir and using the correct agent.

Add Cleaning Agent

Guidance on using appropriate cleaning agents and following dosage recommendations.

Opening and Closing the Door

Open the Door

Step-by-step instructions for safely opening the machine door.

Close the Door

Instructions on how to properly and securely close the machine door.

Water Softener

Setting the Water Softener

Detailed steps for programming the water softener to match local water hardness.

Filling the Salt Reservoir

How to correctly fill the salt reservoir with reactivation salt for the water softener.

Salt Indicator

Explanation of the salt indicator light and its function.

Loading the Machine

Preparing the Load

Pre-loading steps, including emptying containers and ensuring proper item placement.

Adjusting the Top Basket

Guide to adjusting the height of the top basket to accommodate different item sizes.

Items Not Suitable for Dishwashers

List of items that should not be washed in the dishwasher.

Adding Rinsing Agent

Setting the Dosage

How to adjust the rinsing agent dispensing amount for optimal drying results.

Adding Cleaning Agent

Maintenance of the Dispensing System

Procedures for maintaining the liquid cleaning agent dispensing system.

Programme Selection

Programme Chart

Overview of available programmes, their uses, and recommended agent quantities.

Programme Sequence

Detailed breakdown of the stages and steps within each wash programme.

Operation

Switching On and Starting a Programme

Steps to power on the machine and initiate a selected wash programme.

Changing a Programme

How to modify a programme selection before starting it.

Selecting an Additional Function

Guide to adding optional functions like 'Drying' to enhance programme performance.

Programme Sequence Indicators

Explanation of the indicator lights showing the current stage of the wash cycle.

Switching Off

Instructions for safely powering down the machine after use.

Cancelling a Programme

Procedure for stopping a running programme in case of necessity.

Programming Special Functions

Setting the Cold Water Inlet

Adjusting the water intake volume for specific operational needs.

Selecting a Second Interim Rinse

Option to add an extra interim rinse for improved cleaning performance.

Delay Start and Setting Delay Time

How to set a delayed start for wash programmes and adjust the delay period.

Venting and Setting DOS Module Dosage

Instructions for venting the dispensing system and setting detergent dosage.

Altering Main Wash and Final Rinse Temperatures

Guide to adjusting wash and rinse temperatures and holding times.

Audible Tone (Buzzer) Settings

Customizing the buzzer for programme end, faults, or notifications.

Resetting Parameter Changes to Factory Settings

Restoring all custom settings back to the machine's original factory configurations.

Cleaning and Care

Cleaning Filters in the Wash Cabinet

Procedures for cleaning the coarse, flat, and micro-fine filters for optimal performance.

Cleaning the Spray Arms

How to clean the spray arms, ensuring jets are free from blockages.

Cleaning the Drain Pump and Non-Return Valve

Steps to clean the drain pump and non-return valve to resolve drainage issues.

Cleaning Filters in the Water Inlet

Guide to cleaning filters at the water inlet connection to maintain water flow.

Cleaning the Control Panel

Instructions for cleaning the machine's control panel using appropriate methods.

Cleaning the Front of the Machine

Guidance on cleaning the machine's exterior front panel with suitable agents.

Correcting Minor Faults

Machine Does Not Start

Troubleshooting steps for when the dishwasher fails to initiate a programme.

Wash Cycle Finishes Too Early

Diagnosing and resolving issues where the wash cycle terminates prematurely.

Water Not Heated / Programme Lasts Too Long

Troubleshooting heating element issues and prolonged programme durations.

Customer Service

Information on contacting Miele service for persistent faults or error codes.

Installation

Position and Secure the Machine

Guidelines for correctly positioning and securing the dishwasher to the worktop.

Cover Plate (Protects the Worktop)

Information about the protective plate for the underside of the worktop.

Decor Frame Fitting Kit

Details on fitting a decor panel to match kitchen units for a seamless look.

Electrical Connection

Removing Plinth Panel and Protective Cover

Steps for accessing internal components by removing the front plinth panel and cover.

Bonding Connection

Instructions for connecting the earth lead to the designated bonding point.

Plumbing

Connection to the Water Inlet

Requirements and procedures for connecting the machine to the water supply.

Drainage

Guidelines for connecting the drainage hose and ensuring proper water discharge.

Technical Data

Related product manuals