a On/Off button (I-0)
b Door release button
c Display
d Delay start indicator light (see
Programming special functions)
e Drying indicator light
f Programme start indicator light
g Start button
h Drying button
i Button to change between the
current temperature and elapsed
time in the display
j Optical interface
( for Service Technician use only)
k Add liquid
cleaning agent indicator
light (only applies to machine fitted
with an optional external DOS
module)
l Add rinsing agent indicator light
m Add salt indicator light
n Water inlet / Drain indicator light
o Programme sequence indicators
p Programme selector
Guide to the machine
4
To Next Page
