Miele G 7883 CD - Troubleshooting Dosing and Neutralizer Problems

What if... Possible fault Solution
Before the start of a
program, the "8
Dosing Pump"
indicator flashes, and
the program can not be
started.
Before addressing the
error:
–
Turn the program
selector to f. The error
message is erased.
–
Press the On-Off button
to switch off the
machine.
Error message: Fdo:
The liquid detergent
container is empty.
Refill or replace the liquid
detergent container.
Then:
– Switch the washer on.
– Restart the program.
A few minutes after the
start of a program, the
"8 Dosing Pump"
indicator flashes, and
the program stops.
Before addressing the
error:
– Turn the program
selector to f. The error
message is erased.
– Press the On-Off button
to switch off the
machine.
Error message: Fdo:
There is a problem
dispensing the liquid
detergent.
Refill or replace the liquid
detergent container.
Prime the dosage system
(see "Programming
functions").
Then:
–
Switch the washer on.
–
Restart the program.
Frequently asked questions
55