Removing the lid (if necessary)
^
Open the door.
^
Remove the fixing screws on both
sides using a cross slotted
screwdriver.
^
Pull the machine lid approx. 5 mm
forwards, lift upwards and remove.
Protecting the countertop
Important for machines with steam
condenser (depending on model):
To prevent steam damage to the
countertop, adhere the protective foil
9
13
/
16
"x22
13
/
16
"(25x58cm)
underneath the countertop near the
steam condenser.
Depending on the requirements for
installation, the following kit can be
ordered from the Miele Technical
Service Department.
Cover plate (protects the countertop)
The underside of the countertop is
protected from steam damage by a
stainless steel plate.
Installation
67
To Next Page
Loading...
