Cleaning the spray arms.
On rare occasions particles of food
may get stuck in the spray arm jets.
They can be easily cleaned as follows:
To remove the middle spray arm lo-
cated beneath the upper basket,
gently push upwards until it engages
in the ratchet
b, then unscrew it c .
Lift up on the lower spray arm to
remove it.
Dishwashers with cutlery basket:
Unscrew the upper spray arm.
Dishwashers with cutlery tray:
Pull out the cutlery tray.
Push up on the upper spray arm to
engage the tooth-wheel mechanism
and then unscrew the spray arm.
To clean the spray arms, use a
pointed object to push the the food
particles into the jets.
Rinse under running water to com-
plete the process.
After cleaning, replace the spray
arms.
Important:
After replacing the spray arms,
check that they rotate freely.
Cleaning and care
37
To Next Page
Loading...
Need help?
General
