Comparison tests
Test standard: IEC 436 / DIN 44990 / IEC 704 / prEN 50242
Programme tested: UNIVERSAL PLUS 55°
Amount of detergent: If using a detergent containing chlorine:
5 g in compartment I, 25 g in compartment II.
If using a chlorine-free detergent:
30 g
only in compartment II.
Rinse aid dispensing: Setting 3, (approx. 3 ml, set at factory)
Noise measurement: Before starting a programme to measure noise, the
dishwasher door must first be opened completely.
Doing this will automatically close the vent exit for
the turbothermic drying process as in daily use.
Amount washed: 14 place settings
Upper basket
Lower basket
Comparison tests
50
To Next Page
