Miele G5930 - Temperature; Volume

Temperature
The temperature can be displayed in
°C/Celsius or °F/Fahrenheit.
The factory default setting is °C.
^
Select the option you want and
confirm with
OK.
Volume
A buzzer sounds at the end of a
programme and when the appliance
has a fault.
Buzzer at the end of a programme
You will hear the buzzer at the end of a
programme. It will sound four times in
bursts of three beeps with a noticeable
pause (approx. 15 seconds) in
between. Switching the dishwasher off
will switch the buzzer off.
The buzzer at the end of a programme
is deactivated as standard at the
factory.
Buzzer when there is a fault
In the event of a fault, the buzzer will
sound four times in bursts of three
beeps with only a very short pause in
between.
The buzzer which sounds if there is a
fault cannot be deactivated.
Buzzer tones
The volume of the buzzer can be
selected in seven stages.
The buzzer cannot be deactivated in
the case of a fault.
^
Select the volume you want with
+/-.
^
Confirm with
OK.
Night time buzzer tone
You can select a different buzzer
volume for night time.
^ Select the volume you want with
+/-.
^ Confirm with
OK.
Settings menu !
85