Push buttons
With the push buttons you can:
– change the oven temperature.
– change the core temperature, if the
core temperature (roast) probe is
used (depending on model).
– activate the minute minder.
Each push button has a matching sym-
bol in the oven display.
All temperature and time entries or alter-
ations to temperature and time are
made via the "+" or "–" buttons.
Temperatures / times can be entered in
stages (short pushes on the button)
and quickly (hold button down).
In this way the following alterations can
be made
– oven temperature in 5°C stages
– core temperature in 1°C stages
– minute minder in 1 min. stages.
If one of the buttons (p,e, l) is
pressed the indicator light between
the "+" and "–" buttons lights up.
While this light is on, times / tempera-
tures can be entered or altered.
Each time the "+/–" button or one of the
other buttons is pressed this gives
more time for data input.
When the indicator light goes out, the
data input or alteration has been regis-
tered.
Oven - use
20
To Next Page
