Programming cooking time
With the timer it is possible for the oven
and both the front hob cooking zones
to be switched off automatically, or set
to come on at a later time and then also
be switched off.
The oven, the left and right front hob
cooking zones can be programmed in-
dependently of each other.
Programming cooking time in the
oven
When a cooking process is pre-se-
lected, the setting chosen and the sym-
bol " p" are displayed, as well as the
time of day and the symbols for the
time entered. (f, g, )).
During a process the temperature is
shown in the oven display. The time of
day continues to be shown.
Shortly before the end of cooking
time the oven heating switches off auto-
matically.
The Energy-save function (as de-
scribed under "Ovens - Use") comes
into action.
"EC" now appears in the oven display
instead of the actual oven temperature.
The oven temperature will switch on
again if:
– the oven temperature is altered.
– the cooking time is lengthened signi-
ficantly.
At the end of cooking time
– an audible tone sounds for approx.
5 seconds,
– and at the same time the ")" sym-
bol flashes.
Both the audible tone and the visual
display can be cancelled by:
– Pressing the ")" button.
If the food is not sufficiently cooked
to your taste, a further cooking time
can be entered.
– Turning the oven function selector to
"0".
If the audible tone is not switched off it
will continue to sound at 5 minute inter-
vals as a reminder that cooking has fin-
ished. This reminder continues for up
to an hour.
Timer - use
35
To Next Page
Loading...
