Before starting the "Self Clean"
function:
– Remove large pieces of debris
and any puddles of grease
from the oven interior. Debris
and grease can ignite at high
temperatures.
– Remove all accessories, but
the side runners, from the
oven. The high temperatures
of this function will damage
the accessories.
^ Select the "Self Clean" function.
PY I will appear in the display. The
number will start flashing.
^ Use the "V"or"W" control to scroll
between PY I, 2 and 3.
^
Start the "Self Clean" function with the
"OK" control.
The door will lock and the heating will
switch on.
The duration of the cleaning program
can be seen in the display by calling up
the "T" symbol.
PY I
3
PY I
0
I:53
m TS 0
V
Self Cleaning
50
To Next Page
