For openings exactly 23
5
/
8
" (60 cm)
wide:
^ Open the dishwasher door and
remove the caps covering the
mounting holes on the outer edge of
the wash cabinet.
^ Fasten the dishwasher to the
adjacent cabinets using the supplied
screws and bushings. A bushing
must
be placed over the screw
before inserting it into its mounting
hole.
^
Tighten the screws and insert the
caps.
,
The side mounting holes should
only be used for securing the
dishwasher if the opening is exactly
23
5
/
8
" (60 cm) wide.
Use of this method on larger
openings can damage the machine
and cause leaks. Be careful not to
screw into an adjacent appliance.
Installation
24
To Next Page
Loading...
