Why does my Miele Dishwasher stop during a programme?
Your Miele Dishwasher might stop mid-cycle due to a tripped mains fuse. Try resetting the trip switch in your mains fuse box or replacing the fuse in the plug, ensuring it meets the minimum rating specified on the data plate. If the fuse trips again, it's recommended to call the Miele Service Department.
What to do if Miele Dishwasher display remains dark?
If the display on your Miele Dishwasher remains dark after switching it on, check the following: * Ensure the appliance is properly plugged in and switched on at the socket. * Verify that the mains fuse hasn't tripped. If it has, reset the trip switch in the mains fuse box or replace the fuse in the plug, making sure to use the minimum fuse rating indicated on the data plate.
General| Type | Freestanding |
|---|---|
| Noise Level | 46 dB |
| Drying Performance | A |
| Cleaning Performance | A |
| Delay Start | Yes |
| Child Lock | Yes |
| Water Softener | Yes |
| Salt Indicator | Yes |
| Rinse Aid Indicator | Yes |
| Programs | Eco, Intensive, Quick |
Instructions on how to open the dishwasher door using Knock2open.
Guides through setting language, country, and time.
Explains the need for and how to add dishwasher salt.
Describes the function and how to add rinse aid for better drying.
Information on types of dishwasher detergents and their active ingredients.
Troubleshooting common technical issues and their solutions.
Diagnosing and resolving issues with water intake.
Steps to fix problems related to water drainage.
Causes and remedies for dishes not coming out clean.
How to clean the filter in the water inlet hose.
Procedure to clear blockages in the drain pump and valve.
Guidance on connecting the dishwasher to cold or hot water.
Instructions for connecting the dishwasher's drain hose.
Programming the water softener to the local water hardness level.
To Next Page
