Before using for the first time
23
Basic settings
Open the door.
Switch the dishwasher on using the
sensor.
The welcome screen will appear when
the dishwasher is switched on for the
first time.
Language
The display will then change automatic-
ally to the screen for setting the lan-
guage.
Use the arrows to select the lan-
guage you want and also the country,
if applicable, and confirm your selec-
tion with OK.
See "Guide to the appliance, Display"
for more information about the display
and controls.
A tick will appear next to the lan-
guage that has been set.
Time of day
The display will then change to the
screen for setting the time.
The current time of day must be set be-
fore you can use the Delay start option.
Use the arrows to set the hour
and confirm with OK.
Then set the minutes and confirm
with OK.
Keeping the relevant sensor pressed
in, will increase or decrease the time
automatically.
To Next Page
Loading...
Need help?
General
