Before using for the first time
24
Water hardness
The display will change to the screen
for setting the water hardness.
– The dishwasher must be pro-
grammed to the correct water hard-
ness for your area.
– Your local water authority will be able
to advise you of the water hardness
level in your area.
– Where the water hardness fluctuates
e.g. between 1.8 and 2.7 mmol/l (10 -
15 °d - German scale) always pro-
gramme the dishwasher to the higher
value (2.7 mmol/l or 15 °d in this ex-
ample).
In the event of a fault, it will help the
service technician if you know the hard-
ness of your local water supply.
Enter the water hardness below:
____________mmol/l or °d
The dishwasher is programmed at the
factory for a water hardness level of 2.7
mmol/l (15 °d - German scale).
Use the arrows to select the
hardness you want and confirm with
OK.
See "Settings menu, Water hardness"
for more information.
Finally, prompts will appear in the dis-
play.
After confirming these with OK, both the
and indicators will light up.
Add salt and rinse aid if necessary
(see "Before using for the first time",
"Dishwasher salt" and "Rinse aid").
Confirm the messages with OK.
The display will change to show the
main menu.
To Next Page
Loading...
Need help?
General
