Before using for the first time
26
Adding salt
When filling the salt reservoir only
open the door halfway to ensure
that all the salt gets into the reservoir.
Press the button on the top of the salt
reservoir in the direction of the arrow.
The flap will spring open.
Lift up the funnel.
Do not fill the reservoir with water.
Add salt only until the reservoir is full
or until water runs out of the opening.
The salt reservoir holds approx. 1 kg
of salt, depending on the brand used.
Do not add any more than 1 kg of
salt.
As the salt reservoir is filled, displaced
water may overflow.
Clean any excess salt from around
the reservoir opening, and then close
the flap.
Immediately after filling the salt reser-
voir, run the QuickPowerWash pro-
gramme with the Short option and
without any crockery in the dish-
washer to dissolve and remove any
traces of salt from the cabinet.
To Next Page
Loading...
Need help?
General
