20
How to replace the dustbag
Press both release buttons at the side
of the hose connector, and lift the
hose from the socket.
Pull the release catch upwards and
open the dust compartment lid as far
as it will go.
The dustbag has a flap which closes
automatically when the dust compart-
ment lid is raised to prevent any dust
escaping.
Pull the dustbag out by the grip on
the collar.
Fit the new dustbag into the holder
as far as it will go. Leave it folded up
when you take it out of the box.
Close the dust compartment lid se-
curely, making sure it clicks into posi-
tion. Take care not to trap the dust-
bag when doing so.
A safety device prevents the lid clos-
ing without a dustbag in place. Do
not use force!
To Next Page
Loading...
