en
29
After sales service
In the event of a fault that you cannot
easily remedy, please contact your
Miele dealer or Miele. See back cover
for contact details.
Warranty conditions
For information on the appliance war-
ranty specific to your country please
contact Miele. See end of booklet for
contact details.
Electrical connection AU, NZ
All work should be carried out by a suit-
ably qualified and competent person in
strict accordance with national and lo-
cal safety regulations. The voltage and
rated load are given on the data plate
located underneath the vacuum cleaner.
Please ensure that these match the
household mains supply. The fuse rat-
ing is quoted on the plug. The appli-
ance is supplied with a cable and
moulded plug ready for connection to a
230V/50Hz AC single phase supply.
Test Marks Electrical safety
RCM Mark
Electrically sup-
pressed
according to
AS/NZS CISPR
14.1
To Next Page
Loading...
