Miele HS20 - Connecting the telescopic tube to the floorhead; Activating the timestrip filter change indicator on the HEPA AirClean exhaust filter

12
Connecting the telescopic tube to
the floorhead
 Push the telescopic tube into the
floorhead and turn it clockwise or
anti-clockwise until it clicks into posi-
tion.
 To detach the floorhead from the suc-
tion tube press the release button
and pull the suction tube away from
the floorhead, twisting it slightly as
you do so.
Activating the timestrip® filter
change indicator on the
HEPAAirClean exhaust filter
Depending on the model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters:
- HygieneAirCleanSF-HY60 (tur-
quoise)
- HEPAAirCleanSF-HA60 (white)
If your vacuum cleaner is fitted with a
HEPAAirClean exhaust filter, you need
to activate the timestrip® filter change
indicator.
You will recognise that the
HEPAAirClean exhaust filter is fitted to
the appliance by an indicator strip
hanging out of the exhaust filter com-
partment.
 Press the release catch on the ex-
haust filter compartment flap and re-
move the flap.