Miele HS20 - When to replace the exhaust filter

24
 Clean the filter frame and the side
flap using a slightly damp cloth and
mild washing-up liquid if necessary.
 Clean the filter frame and the side
flap carefully.
 Refit the filter at the bottom of the dry
filter frame and close it, making sure
it clicks into position.
a Carefully fit the dry side flap with the
filter frame at the bottom of the dust
container.
b Lift up the dust container handle and
hold it in this position.
c Press the side flap firmly into posi-
tion.
 Refit the dust container to the va-
cuum cleaner.
When to replace the exhaust filter
Depending on the model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters:
- HygieneAirCleanSF-HY60 (tur-
quoise)
Replace this exhaust filter after ap-
prox. oneyear. Make a note of the
date on the exhaust filter.
- HEPAAirCleanSF-HA60 (white)
Replace this exhaust filter if the
timestrip® filter change indicator is
completely red.
The display will be completely filled
with red after approximately 50 oper-
ating hours; this corresponds to ap-
proximately one year of average use.
You can continue vacuuming when
the light comes on. However, the
suction power will be reduced as will
the effectiveness of the filter if it is
not replaced in good time.