Miele HS20 - Page 23

23
a Lift up the dust container handle and
hold it in this position.
b Press the release catch on the side
flap. There is a cut-out on the oppos-
ite side to make it easier to remove
the side flap.
c Remove the side flap.
Once the side flap has been removed,
the pre-filter inside can be accessed.
 Clean the pre-filter and the side walls
on the inside using the cleaning tool.
 Risk of damage caused by incor-
rect cleaning.
The pre-filter can become damaged
and be less effective as a result.
Do not use pointed or sharp-edged
objects to clean the pre-filter.
 Clean the interior side walls using a
slightly damp cloth and mild wash-
ing-up liquid if necessary.
 Dry the interior side walls carefully.
The filter frame is located on the rear
side of the removed side flap at the bot-
tom.
 Press the two release catches on the
side of the filter frame and remove the
filter.
 Clean the filter using the cleaning
tool.
 Risk of damage caused by incor-
rect cleaning.
The filter can become damaged and
be less effective as a result.
Do not use pointed or sharp-edged
objects to clean the filter.