Miele K 622 Ui-1 - Securing Appliance Door to Furniture Panel

^ Securing the appliance door to the
furniture door:
– Open out plastic brackets a using a
screwdriver.
– Drill fixing holes and screw in the
short 4 x 14 mm chipboard screws
b.
^ Align depth "Z" on the furniture door:
Loosen the screws in the long slots at
the top c and bottom d of the
appliance door. By moving the
furniture door, create a gap of 2 mm
between the furniture door and the
front edge of the niche. Close the
door and align it with neighbouring
furniture doors.
^
Close plastic brackets a again.
Securing the appliance
^
Whilst counterholding the adjusting
bolts b with a screwdriver, tighten
nuts a at the top of the appliance
door.
^ Tighten all screws.
^
Place the cover in position.
Building in the appliance
36