Cleaning and care
59
C
arefully remove, the ice cube draw‐
er, which will be full of water. Empty
and clean it.
The ice cube tray c
annot be removed
and must be cleaned in situ.
Dr
y the ice cube tray with a soft
cloth.
When the ice cube maker is switched
back on aga
in, the ice cube tray will
rotate back into the original position.
Cleaning the ice cube tray
Clean the ice cube tray,
– befor
e switching off the ice cube
maker for a long time
– regularly, to remove ice and water
residues.
If you have previously selected the
setting
"Rinse the ice cube maker"
(see "Rinsing the ice cube maker"),
the ice cube tray will already be in the
cleaning position.
The ice cube tray ca
nnot be re‐
moved and must be cleaned in situ. To
clean the tray you need to move it into
the cleaning position.
Selecting the cleaning position
The setting can only be selected if
the
ice cube maker is switched on.
Empty the ic
e cube drawer.
T
ouch the settings sensor.
All symbols available for selection will
appear in the display and the
symbol
flashes.