Cleaning and care
65
Door seal
Do not use any grease or oil on the
door seal as these will cause the seal
t
o deteriorate and become porous
over time.
The
door seal should be cleaned reg‐
ularly with clean water, and then wi‐
ped dry with a soft cloth.
Ventilation gaps
The ventilation gaps should be
cle
aned on a regular basis with a
brush or vacuum cleaner.
A build-up of dust will increase the
energy consumption of the appliance.
After cleaning
Replace all shelves and accessories
in the appliance.
The left-hand shelf supports have
metal discs (contacts) which supply
power t
o the LED lighting.
Make sure that the contacts are clean
and dry before inserting the shelves
with LED lighting.
Push the shelf in until it clicks into po‐
sition, as otherwise the lighting will not
work.
Reco
nnect to the mains and switch
the appliance back on.
Switch on the Super freeze function
for a while so that the freezer section
can cool down quickly.
Switch on the Super cool function for
a while so that the appliance can cool
down quickly
.
Place
food in the refrigerator section
and close the door.
Once the t
emperature in the freezer
section has reached the required
temperature, place the food back in
the freezer drawers and put them
back in the freezer section.
When the t
emperature in the freezer
section is a constant -18 °C or colder
press the Super freeze button to
switch the Super freeze function off.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
