Refigerator section
During normal operation, condensate
and frost can form on the back wall of
the refigerator section. These are
automatically removed by the
appliance during automatic defrosting.
The condensate is drained away
through a channel and drain hole, then
fed into an evaporation system at the
back of the appliance.
It is important to keep the
condensate channel and drain hole
clean and free of blockages, so that
the condensate can flow away
properly.
Freezer section
The freezer is equipped with a
"frost-free" system, which automatically
defrosts the freezer section as needed,
to prevent build-up.
The moisture generated in the
appliance collects on the condenser,
and is automatically defrosted and
evaporated periodically.
This automatic defrosting system keeps
the freezer section permanently
ice-free, while ensuring that the food
stored in the freezer section does not
defrost.
Automatic defrosting
29
To Next Page
Loading...
Need help?
General
