Cleaning and care
35
The surface of the burner cap will be-
come duller with time. This is com-
pletely normal and does not indicate
material deterioration.
The burner cap has a PerfectClean
treated surface with excellent non-
stick properties which make cleaning
easier.
Assembling the small, medium and
large burners
Place the burner head onto the
burner base so that the thermo-
couple, the ignitor and the re-
taining pins fit into their respective
holes in the burner head.
Position the burner cap onto the
burner head so that the retaining
pins fit into their respective recesses.
Gently twist the burner cap clockwise
or anti-clockwise until it locks into
position. When correctly positioned,
the burner cap will not slide about.
Ensure parts are reassembled in the
correct order.
To Next Page
Loading...
