Miele KM 2012 - Page 56

Installation
*
I
N
S
T
A
L
L
A
T
I
O
N
*
56
Connecting the hob
The hob is supplied with a conical ¹/₂"
gas connection point. There are two
connection options:
– Fixed connection
– Flexible connection in accordance
with DIN 3383 Part 1, maximum
length 2000 mm. (Not for the UK.)
 Risk of explosion due to gas
leakage.
Unsuitable sealant will not ensure the
required leak protection for connec-
tions.
Ensure that a suitable sealant is
used.
Using a 90° angle
a
Connection R¹/₂" with test point -
ISO7-1 (DINEN10226)
b
90° elbow
The installation height in the area of
the gas connection is increased by
approx. 60mm.