Programming
44
Programme
1)
Status
2)
Settings
P0 Demonstration
mode and factory
default settings
S0
Demonstration mode on
3)
S1 Demonstration mode off
S9 Factory default settings reinstated
P2 Number of power
levels
S0 9 power levels
S1
17 power levels
4)
P4 Keypad tone when
a sensor is
touched
S0 Off
S1 Quiet
S2 Medium
S3 Loud
P5 Audible tone for
the timer
S0 Off
S1 Quiet
S2 Medium
S3 Loud
P7 System lock S0 System lock can only be activated
manually
S1 Activating the system lock
automatically and manually
P6. Sensor switch
reaction speed
S0 Slow
S1 Normal
S2 Fast
1)
Programmes not shown here have no allocation.
2)
The factory setting is shown in bold.
3)
After the cooktop has been switched on, will appear in the front left cooking zone
display and will appear in the front right cooking zone display for a few seconds.
4)
The intermediate levels are shown on the cooking zone indicator with a dot after the
power level. Display of the Auto heat-up through the flashing of the continued cooking
setting alternating with .
To Next Page
Loading...
