Miele KM 6357 User Manual (English)

Questions and Answers:

J
Jennifer FloresAug 13, 2025
Why won't my Miele Cooktop turn on?
- M
  Marie PhamAug 14, 2025
  If your Miele Cooktop or cooking zones cannot be switched on, it could be due to a tripped circuit breaker. Reset the circuit breaker, referring to the data plate for the correct fuse rating. Alternatively, there may be a technical fault. In this case, disconnect the appliance from the electric power supply for approximately 1 minute by tripping the relevant circuit breaker or unscrewing the fuse completely, or by tripping the ground fault circuit interrupter (GFCI). If the cooktop still does not switch on after resetting or replacing the fuse or the GFCI, contact a qualified electrician or Miele Customer Service.
E
Emily LewisAug 17, 2025
What does FE 47 mean on my Miele KM 6357?
- C
  Christopher HintonAug 17, 2025
  If the Miele cooktop displays fault message FE 47, it indicates that the fan is blocked or faulty. Ensure that the fan has not been blocked by something. Remove the cause of the blockage. If the fault message appears again, call Miele Customer Service.
B
bishopjamieAug 21, 2025
What does FE error mean on Miele KM 6357?
- C
  Charlene GonzalesAug 21, 2025
  If your Miele cooktop displays other fault messages starting with FE, it indicates a fault in the electronics. To resolve this, interrupt the power supply to the cooktop for approximately 1 minute. If the problem persists after reconnecting the power supply, contact Miele Customer Service.
T
Thomas FieldsAug 25, 2025
What to do if my Miele KM 6357 Cooktop switches off and F is flashing?
- R
  Rebecca HawkinsAug 25, 2025
  If your Miele Cooktop switches off while in use and a flashing F appears in the timer display, it indicates that one or more of the sensors are covered. This could be due to fingers, food boiling over, or an object on the control panel. To resolve this, clean the control panel or remove the object. Refer to the section on "Safety switch-off" for detailed instructions.
A
Angel NormanAug 29, 2025
Why does my Miele Cooktop keep turning off?
- D
  Deanna RamseyAug 29, 2025
  If a cooking zone or the whole Miele cooktop switches off automatically, it could be due to a cooking zone having been in use for too long, or the overheat protection being triggered. If a cooking zone has been in use for too long, you can use it again by switching it back on. Refer to the 'Safety switch-off' section. If the overheat protection was triggered, see the 'Overheat protection' section.
H
Hector WareSep 1, 2025
What to do if Miele KM 6357 sensors are not working?
- M
  Matthew GoodmanSep 1, 2025
  If the sensors on your Miele cooktop are over-sensitive or do not react at all, it could be due to a change in the sensitivity level of the sensors. Ensure that the cooktop is not in direct sunlight or strong artificial light, and that the area around the cooktop is not too dark. Also, make sure that neither the cooktop nor the sensors are covered. Remove any cookware and clean the cooktop, removing any food residues. Interrupt the power supply to the cooktop for approximately 1 minute. If the problem persists, please call Miele Customer Service.
W
warnersusanSep 5, 2025
Why is auto heat-up not working on my Miele KM 6357?
- R
  Rebecca SparksSep 5, 2025
  If auto heat-up is turned on but the food does not start cooking on your Miele cooktop, it is possible that you are heating large amounts of food. Start cooking at the highest power level, then reduce the power level manually.
P
parksallenSep 8, 2025
Why does my new Miele KM 6357 Cooktop smell?
- D
  Donald HayesSep 9, 2025
  Each subsequent use of the Miele Cooktop reduces the odour and it will ultimately dissipate entirely.

Miele KM 6357 Specifications

General

Hob type	Zone induction hob
Frame form	Direct
Frame type	Full trim
Frame color	Stainless steel
Product color	Black
Top surface type	Glass-ceramic
Appliance placement	Built-in
Cooking zone 1 type	Simmer
Cooking zone 2 type	Extra large
Cooking zone 4 type	Large
Cooking zone 1 boost	2200 W
Cooking zone 1 power	1400 W
Cooking zone 2 power	2600 W
Cooking zone 2 shape	Round
Cooking zone 3 power	2100 W
Cooking zone 4 boost	3000 W
Cooking zone 4 shape	Rectangular
Flexible cooking zone	Yes
Cooking zone 1 position	Left rear
Cooking zone 2 position	Left front
Cooking zone 3 position	Middle rear
Cooking zone 4 diameter	230 mm
Cooking zone 4 position	Right rear
Number of cooking zones	4 zone(s)
Cooking zone 2 power source	Electric
Cooking zone 3 double boost	3700 W
Number of gas cooking zones	0 zone(s)
Simmer cooking zone diameter	160 mm
Regular cooking zone diameter	280 mm
Number of flexible cooking zones	1 zone(s)
Number of power levels	9
Extra large high-speed cooking zone	3400 W
Control type	Touch
Control position	Top right
Current	16 A
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Connected load (electric)	7300 W
Package depth	648 mm
Package width	930 mm
Package height	135 mm
Package weight	14000 g