To Next PageTo Next Page
Need help?Do you have a question about the Miele KM 6347 and is the answer not in the manual?
General| Type | Induction |
|---|---|
| Number of Cooking Zones/Burners | 4 |
| Width | 60 cm |
| Control Type | Touch Control |
| Power Levels | 9 |
| Boost Function | Yes |
| Stop & Go Function | Yes |
| Timer | Yes |
| Residual Heat Indicator | Yes |
| Ignition Type | Automatic |
| Material | Ceramic Glass |
| Weight | 11 kg |
| Safety Features | Child Lock |
Defines the intended use and limitations of the hob, and outlines proper usage procedures.
Provides guidelines to ensure child safety around the appliance, including warnings about hot surfaces.
Details electrical safety, earthing requirements, and installation safety standards.
Instructions for cleaning the hob safely and effectively, including warnings about steam cleaners.
Identifies different hob models (KM 6322, KM 6323, KM 6347, KM 6348) and their general layout.
Explains the layout and function of the control panel, including sensor controls and their operations.
Describes the meaning of various indicator lights and display symbols used on the hob.
Details the dimensions and power ratings for each cooking zone across different models.
Guidelines for the proper disposal and recycling of packaging and old appliances.
Steps for cleaning the appliance before its first use and initial observations.
Explains how induction heating works and its basic operation with pans.
Describes common noises produced and guidance on selecting suitable cookware for induction hobs.
Explains how to interact with the hob's sensor controls for basic functions.
Details the procedure for turning the hob on and off.
Steps to activate cooking zones and set desired power levels.
How to adjust power levels and use the PowerFlex cooking area feature.
Instructions on using the auto heat-up feature for efficient cooking.
Explains how to use the booster functions for rapid heating and keeping food warm.
Procedures for switching off zones and understanding residual heat indicators.
Guide to setting and managing the minute minder timer.
How to program a cooking zone to switch off automatically.
Instructions for operating the minute minder and auto-switch-off simultaneously.
Explains how to activate and use the hob's safety and system locks to prevent unintended operation.
Details the functionality and operation of the Stop and Go feature for temporary pauses.
Covers automatic switch-off due to over-long cooking or covered sensors.
Describes how the overheating protection mechanism works and its triggers to prevent damage.
Steps to enter the programming mode for settings adjustment.
How to configure specific programmes and their associated statuses.
Instructions on how to save or cancel changes made in programming mode.
Lists recommended pans, cleaning agents, and cloths for hob maintenance.
Information on connecting the hob to Miele@home and Con@ctivity systems for smart features.
Step-by-step guide to connecting the hob to the Miele@home or Con@ctivity systems.
Procedure for disconnecting the hob from the Miele@home or Con@ctivity systems.
Specifies required clearances above the hob for safety from heat and ventilation.
Details minimum distances required from walls and adjacent units to the sides and back of the hob.
Specifies necessary gaps between the hob and cabinets or ovens below for ventilation.
Safety distances required when installing near wall cladding, differentiating between combustible and non-combustible materials.
Guidance on worktop sealing and installation notes for hobs with frames or bevelled edges.
Provides specific cutout and fitting dimensions for KM 6322 and KM 6347 models.
Step-by-step guide for installing framed hobs, including mains connection.
Provides cutout dimensions for KM 6323 and KM 6348 flush-fitted models.
General advice on installing flush-fitted hobs into various worktop materials.
Guides for preparing granite/marble and solid wood/tiled worktops for flush fitting, including sealing.
Outlines electrical safety standards, cable types, and connection requirements for safe operation.
Illustrates the electrical connections and wiring for the appliance, including single-phase supply.
