Need help?Do you have a question about the Miele KM 6360 and is the answer not in the manual?
General| Number of Cooking Zones/Burners | 4 |
|---|---|
| Total Power | 7.4 kW |
| Size/Width | 60 cm |
| Color | Black |
| Appliance type | Built-in |
| Frame | Stainless Steel |
| Type | Induction |
| Burner power levels | 9 |
| Material | Glass-Ceramic |
Defines the intended domestic use and restrictions for the cooktop.
Provides essential safety guidelines regarding children and the cooktop.
Covers safety aspects related to installation, maintenance, and electrical connections.
Details safe operating practices to prevent fires and damage during use.
Instructions on how to safely dispose of packaging materials.
Guidance on environmentally responsible disposal of the old appliance.
Diagram and description of cooking zones and controls for models KM 6360/6365.
Diagram and description of cooking zones and controls for models KM 6370/6375.
Diagram and description of cooking zones and controls for model KM 6377.
Explanation of sensor buttons and indicators on the control panel.
Technical specifications for cooking zones, including diameter and output.
Instructions for initial cleaning of the cooktop surface.
Information on initial operation and potential smells or vapors.
Explains the principle of induction heating and cookware recognition.
Details suitable and unsuitable cookware for induction cooktops.
Describes error indicators and provides tips for optimal cookware use.
Explains various sounds that may occur during induction operation.
Provides recommendations for efficient energy usage.
Details default and extended power levels for various cooking tasks.
Explains how to use the touch controls and indicators for basic functions.
Guides on switching the cooktop and individual cooking zones on and off.
Instructions for adjusting the heat setting for cooking zones.
Explains the function and meaning of the residual heat indicator.
Details on setting power levels beyond the default range.
Instructions for activating and deactivating combined cooking zones.
Explains the automatic heat-up feature and its heat-up times.
Details the Booster function for quick heating and its limitations.
Step-by-step guide to activating Booster and TwinBooster levels.
Instructions for using the function to keep food warm.
Step-by-step guide to setting the timer in minutes.
Instructions for setting the timer in hours and half-hours.
Procedures for modifying or removing an active timer setting.
How to set a time for individual burners to switch off automatically.
Guidance on using the minute minder and auto shut-off simultaneously.
Explains how to activate/deactivate the Stop & Go feature.
Details on activating and deactivating the system and safety locks.
Information on automatic shut-off due to excessive operation or covered sensors.
Explains overheat protection mechanisms for inductive coils and cooling elements.
Basic instructions for cleaning the cooktop and avoiding damage.
Lists cleaning agents that should not be used to avoid damage.
Detailed steps for cleaning the ceramic surface, including spot removal.
Steps to initiate the cooktop's programming mode.
Instructions for selecting specific programs and their settings.
Procedures for saving or discarding programmed settings.
Table detailing programs (P0-P8), their statuses, and settings.
Table detailing programs (P10, P15, P16), their statuses, and settings.
Troubleshooting steps for power issues, initial smells, and cookware detection.
Explanation for LC indicator and flashing power levels.
Troubleshooting for sensor cover warnings, demo mode, auto shut-off, and overheating.
Troubleshooting for power reduction, auto heat-up, and fan noise.
Resolving issues with residual heat indicators and error codes (FE, FE44).
Steps to connect the cooktop to the Con@ctivity system.
Steps to disconnect the cooktop from the Con@ctivity system.
Information on contacting Miele for service and fault resolution.
Details on warranty terms and registering your appliance.
Critical safety warnings specifically for the installation process.
Safety advice regarding electrical shock, falling objects, and cabinet placement.
Specifies required clearances above the cooktop, especially for ventilation hoods.
Specifies required clearances below the cooktop for ventilation.
Specifies safety distances for wall coverings based on combustibility.
Covers proud, flush installation, and countertop material considerations.
Details required ventilation cut-outs and clearances for the cooktop.
Dimensional drawings for proud installation of specific cooktop models.
Detailed steps for creating cut-outs, sealing, and placing the cooktop.
Dimensional drawings and notes for flush installation on various surfaces.
Instructions for safe electrical connection and grounding by qualified personnel.
Information about Miele's extended service contract program.
To Next Page
