To Next PageTo Next Page
Need help?Do you have a question about the Miele KM 6323 and is the answer not in the manual?
Defines intended use and restrictions of the appliance.
Guidelines for child safety around the appliance.
Ensures safe installation, maintenance, and electrical connections.
Instructions on safe cooking practices and fire prevention.
Advice on cleaning the appliance and avoiding damage.
Identifies appliance models KM 6322 / KM 6323 and KM 6347 / KM 6348.
Details the functions and layout of the control panel.
Explanation of indicator lights and their meanings.
Meaning of symbols and codes in cooking zone displays.
Description of timer display elements and their functions.
Specifications for cooking zones in different models.
Information on environmentally friendly disposal and recycling of packaging.
Guidance on responsible disposal of old electrical appliances.
Instructions for initial cleaning of the appliance.
Notes on initial smells, heating times, and installation gaps.
Explanation of how induction heating technology works.
Describes common noises associated with induction cooking.
Guidance on suitable and unsuitable cookware for induction.
Instructions on using the hob's electronic sensor controls.
Step-by-step guide to turning the hob on.
How to select and activate individual cooking zones.
Instructions for setting standard and extended power levels.
How to change the power level of an active cooking zone.
Explanation of combining zones into a PowerFlex cooking area.
Instructions for activating and deactivating the Auto heat-up function.
Details the Booster function for rapid heating.
Instructions for using the 'h' keeping warm function.
How to switch off zones/hob and understand residual heat.
How to set, change, and delete the minute minder.
Procedure for setting automatic switch-off times for cooking zones.
Combining minute minder and automatic switch-off functions.
Information on activating and using the safety and system locks.
How to use the Stop and Go feature to pause cooking.
Explanation of safety switch-off for long cooking times and covered sensors.
Details the overheating protection mechanism for coils and cooling elements.
Steps to enter the programming mode for settings.
Procedure for setting programme values for cooking zones.
Procedure for setting status values for the appliance.
How to save the programmed settings.
How to exit programming without saving settings.
Troubleshooting steps for when the hob or cooking zones do not power on.
Explains common smells during initial use and their resolution.
Troubleshooting when the U symbol indicates an issue with pan detection.
Resolving the 'LE' error code indicating system lock.
Resolving the 'BE' error code indicating demonstration mode.
Troubleshooting steps for cooking zones not heating.
Diagnosing automatic switch-off issues for zones or the entire hob.
Troubleshooting Booster deactivation due to overheating.
Addressing issues with cooking zone performance at set power levels.
Explanation for power level reduction on linked zones.
Troubleshooting when the hob switches off due to covered sensors.
Addressing issues with food heating during Auto heat-up.
Explanation for the cooling fan running after appliance use.
Troubleshooting sensor sensitivity and reaction issues.
Interpreting and resolving 'FE' fault codes related to overheating or fan issues.
Information on Miele's range of compatible cookware.
Details on recommended ceramic and stainless steel hob cleaners.
Overview of the Miele@home system for appliance connectivity.
Explanation of Con@ctivity for hob and cooker hood communication.
Procedure for signing the hob onto Miele@home or Con@ctivity systems.
Procedure for signing the hob off Miele@home or Con@ctivity systems.
Required clearances above the hob for safety.
Minimum clearances required to the sides and rear of the hob.
Required gaps underneath the hob for ventilation.
Safety distances required for niche cladding based on material type.
Guidance on sealing the hob to the worktop and installation.
Dimensions for installing specific models into a worktop.
Step-by-step instructions for installing the hob onto the worktop.
Procedure for connecting the mains electrical cable.
Dimensions for installing flush-fitted models into worktops.
Guidance on installing flush-fit hobs in various worktop types.
Specific instructions for preparing granite/marble worktops and installing the hob.
Instructions for preparing wood/tiled/glass worktops and installing flush-fit hobs.
Procedure for connecting the mains cable for flush-fitted hobs.
Schematic diagrams illustrating the electrical wiring connections.
General
