To Next PageTo Next Page
Need help?Do you have a question about the Miele KM 6117 and is the answer not in the manual?
General| Width | 60 cm |
|---|---|
| Width (mm) | 600 mm |
| Depth (mm) | 510 mm |
| Number of Cooking Zones | 4 |
| Number of burners | 4 |
| Dimensions (W x D x H) | 600 x 510 x 50 mm |
| Weight | 11 kg |
| Controls | Touch |
| Burner types | Induction |
| Total power output | 7400 W |
| Ignition type | Automatic |
| Material | Glass ceramic |
Overview of the different Miele hob models KM 6113, KM 6112, KM 6115, KM 6116, KM 6117, KM 6118.
Details and functions of the appliance's control panel and its sensors.
Explanation of the various sensor controls for operating the hob.
Information on the meaning of symbols and indicators in the cooking zone displays.
Explanation of the timer display and its indicators for setting times.
Technical specifications and dimensions for each cooking zone on the hob.
Specifies the intended domestic use of the hob and prohibited commercial applications.
Essential safety measures to protect children from potential hazards associated with the hob.
Covers electrical safety requirements, installation guidelines, and maintenance precautions.
Guidelines for safe operation, including precautions for pacemakers and handling hot surfaces.
Guidance on the environmentally friendly disposal and recycling of packing materials.
Instructions for the correct disposal of old electrical appliances to protect health and environment.
Instructions for cleaning the appliance before its initial use.
Explanation of the electromagnetic principle behind induction cooking zones.
Describes potential noises during induction hob operation and their causes.
Information on suitable and unsuitable types of pans for induction hobs.
Basic instructions on how to operate the hob using its sensor controls.
Steps to switch the hob on and activate cooking zones and power levels.
Guide to standard and extended power settings for various cooking tasks.
Details on activating and deactivating the automatic heat-up function for cooking zones.
Explanation of the Booster and TwinBooster functions for rapid heating.
How to use the keeping warm function for cooked food.
Instructions for switching off cooking zones and the hob, and understanding residual heat.
How to set, change, and delete the minute minder timer function.
Procedure for programming a cooking zone to switch off automatically after a set time.
Guidance on using the minute minder and automatic switch-off functions concurrently.
Explanation of the safety lock and system lock features to prevent unintended operation.
Details on automatic shut-off for over-long cooking times and covered sensors.
Information on the overheating protection mechanisms for induction coils and cooling elements.
Describes the overheating protection for the control panel electronic unit.
Instructions for cleaning the ceramic hob surface and removing stubborn soiling.
How to activate the reset function to restore original factory default settings.
Guide to changing default program options and settings for the appliance.
Specifies the required vertical clearance between the hob and overhead units or cooker hood.
Details required clearances to adjacent furniture, walls, and the rear of the worktop.
Requirements for ventilation gaps between the hob underside and any cabinets or ovens below.
Guidelines for safety distances when installing the hob near wall cladding.
Instructions on how to properly seal the hob to the worktop for a flush fit.
Detailed dimensions for installing the KM 6112 model hob into a worktop.
Detailed dimensions for installing the KM 6113 model hob into a worktop.
Detailed dimensions for installing the KM 6115 model hob into a worktop.
Detailed dimensions for installing the KM 6116 model hob into a worktop.
Detailed dimensions for installing the KM 6117 model hob into a worktop.
Detailed dimensions for installing the KM 6118 model hob into a worktop.
Steps for preparing the worktop, including cut-outs and sealing, before hob installation.
Procedure for placing the hob centrally in the cut-out and ensuring a proper seal.
Instructions for connecting the hob to the mains electricity supply by a qualified electrician.
Schematic diagrams illustrating the correct wiring connections for the appliance.
