en - Securing a side-by-side combination
43
Secure the supplied hinge halves
onto both appliances.
Secure the fixing lugs onto both ap-
pliances. Check the position of both
appliances again.
Installing the side panel heater
The side panel heater must be attached
to the right side of the appliance that is
on the left (when seen from the front).
Insert the pins into their respective
holes in the side panel heater 1.).
Remove the protective strip from the
adhesive tape 2.).
Maintain a gap between the bottom
of the side panel heater and the bot-
tom of the appliance, and insert the
pins into the holes at the top 3.).
Push the side panel heater onto the
appliance from top to bottom and in-
sert the pins into the bottom holes
4.).
To Next Page