en - Securing a side-by-side combination
44
Loosen the screw on the plug cover
5.).
Remove the plug cover 6.).
Connect the cable 7.).
Reinstall the plug cover 8.).
Tighten the screw on the plug cover
9.).
Slightly loosen the screws on the
back of the appliance 10.).
Push the cable cover supplied into
the slots on the side panel heater.
Hook the cable cover onto the screws
on the back of the appliance 11.).
Now tighten the screws 12.).
Connecting the refrigeration
appliances
Push the appliances together at the
back until the hinge halves engage.
Insert the pins into the hinge halves
from the top.
Push the appliances as close to-
gether as possible at the front.
To Next Page