Locking a program
To lock a program, a program must be started first.
^
Select a program and begin it with
Start.
Sensor Wash
12:00
Main wash
Time left 1:23 h
° W
Cancel °
^
Select ).
^
Select
On to activate this function and confirm with OK.
The program is locked. It stays locked until the lock is
deactivated.
To cancel a running program, the program lock must be
deactivated first.
Once the program is finished, deactivate the lock or turn the
dishwasher off and on again before starting a new program
or selecting settings.
Deactivating the program lock
Sensor Wash
12:00
Main wash
Time left 1:04 h
° X
^
Select $ and confirm with
OK.
^
Select
Off to deactivate this function and confirm with OK.
The program is unlocked. Any selections can be made.
Settings J
49
To Next Page
Loading...
