Miele LaPerla G 2830 SCi - Page 55

Issue Possible fault Solution
The program "Energy
Saver" displays the
fault:
Water intake temp. too
low
The intake water does not
have a minimum
temperature of 115°F
(45°C). See "Plumbing -
Connection to the water
supply".
–
Restart the program.
–
If the fault is displayed
again, use a different
program.
The buzzer sounds.
The display shows
the following:
Drain fault FXX
Before fixing the fault:
–
Turn the dishwasher off s.
Fault F11: Fault in the
water drain. There might
be water in the wash
cabinet.
–
Clean the triple filter.
–
Clean the drain pump and
the non-return valve.
–
Clean the drain pump and
the non-return valve.
See "User Maintenance
Instructions" for instructions
on the above.
– Remove any kinks in the
drain hose.
Frequently asked questions
55