Building in the appliance
33
Checking the installation niche
Check the installation dimensions.
Check the position of the electrical
connections (see “Electrical connec-
tion”).
Check that all adjacent cabinets/units
are securely fixed to the wall. All adja-
cent cabinets/units must be securely
fixed to the wall.
Check the adjacent cabinets/units for
possible collisions when opening
doors (door opening angle).
Before installation
Heavy weight!
This appliance is very heavy and can
tip forwards when the door is open.
Before installation, take any acces-
sories out of the appliance and/or
from the back of the appliance.
Check the appliance for damage dur-
ing transportation.
Do not install a damaged appliance!
Check that all parts at the back of the
appliance are unhindered.
To protect the floor when installing
the appliance, secure an off-cut of
flooring or similar material to the floor
in front of the installation area.
To Next Page
Loading...
Need help?
General
