Signing off
^
With the hob switched off, touch the hob ON/OFF sensor s
and the safety lock sensor $ at the same time until the
indicator for the safety lock flashes.
After the programming mode has been called up, P
(Programme), S (Status) and numbers will appear in the
cooking zone displays. These show the current settings.
^
On hobs with 4 or more cooking zones touch the front left
+ sensor and on hobs with 3 cooking zones touch the left
+ sensor until the following shows in the display
- 0. (hobs with 9[17] power levels) or
- 10 (hobs with 12[23] power levels).
^ On hobs with 4 or more cooking zones touch the front
right + sensor and on hobs with 3 cooking zones touch
the rear right + sensor until a 1 appears in the display.
The signing off process will start and a rotating § will appear
in the display. The signing off process will take a few minutes.
As soon as it has been completed successfully, the Status 1
will appear in the display.
^ Touch the hob ON/OFF sensor s until the displays go out
to save the setting.
Signing on/off KM 59** hobs
28
To Next Page
Loading...
Need help?
General
