Need help?Do you have a question about the Miele KM 5670 and is the answer not in the manual?
Details the KM 5670 model, including its cooking zones and control panel.
Explains the control panel layout, sensor switches, and indicator lamps for operation.
Describes the specific functions of each sensor switch on the hob's control panel.
Explains the symbols and indicators shown on the cooking zone display.
Details the display for the timer and memory functions, including indicator lamps.
Provides specifications for the cooking zones, including diameter and power rating.
General warnings and safety advice for operating the appliance safely.
Ensures electrical safety through proper installation and earthing by qualified personnel.
Advice on the correct and intended domestic use of the appliance.
Precautions to ensure the safety of children around the operating appliance.
Tips to prevent damage to the ceramic hob surface and its components.
Warnings and advice to prevent burns and scalding hazards during use.
Guidance on handling appliance faults and additional safety considerations.
Instructions for the safe and environmentally friendly disposal of packing materials.
Guidelines for the proper disposal of the old appliance to protect health and environment.
Instructions for cleaning the appliance before its initial use.
Information about initial heating and potential smells or fumes.
Steps for automatic and manual calibration of the sensor switches for optimal operation.
Explanation of the single circle cooking zone, including overheating protection.
Explanation of the double circle zone, its components, and overheating protection.
Guidance on using the touch-sensitive sensor switches for operation.
Instructions on how to switch the hob on and select cooking zones.
Table of recommended cooking settings for various food preparation processes.
Explanation of the Auto heat-up function and its heat-up times based on settings.
Step-by-step guide to activating the Auto heat-up function for cooking zones.
Instructions for operating cooking zones without using the Auto heat-up feature.
How to activate the outer circle for larger cooking areas on compatible zones.
How to switch off cooking zones and the hob, and understand residual heat indicators.
Recommendations on suitable pans for ceramic hobs, including base and diameter.
Advice on using the hob efficiently to save energy during cooking.
Overview of the hob's minute minder, automatic switch-off, and memory functions.
Instructions on how to set and use the minute minder feature.
How to set a cooking zone to switch off automatically after a specified time.
Explanation of the default timer starting value and how to adjust it.
Step-by-step guide on how to record a cooking process as a memory programme.
How to recall and use a previously recorded memory programme.
Instructions on how to delete a saved memory programme.
Using the minute minder, auto switch-off, and memory functions simultaneously.
How to activate and deactivate the safety lock to prevent unintended operation.
Explains the Stop and Go feature for pausing and resuming cooking.
Details safety switch-off for long cooking times and covered sensors.
Explanation of the overheating protection mechanism that limits heat to prevent damage.
Guidance on cleaning the hob after each use, including recommended products.
How to remove limescale spots and care for the appliance's aluminium frame.
Instructions on how to access and modify the hob's programming settings.
Details programmes P0 to P6 for demonstration mode, keypad tone, timer, safety lock, stop/go, and loudness.
Details programmes P7 to P13 for extended cooking areas, power settings, auto heat-up, and residual heat indicators.
Details programmes P14 to P16 for timer starting value, timer functions, and power setting range.
Troubleshooting steps if the hob or cooking zones cannot be switched on.
Diagnosing why the hob switches off, indicated by residual heat or flashing F.
Explanation for normal cycling of heating elements and overheating protection.
Troubleshooting tips for food not heating or heating poorly with Auto heat-up.
Resolving issues where numbers light up in the timer display when the hob is off.
Addressing slow boiling times and flashing residual heat indicators.
Troubleshooting display errors F and E, and audible tones.
Method for testing cooking zone power by measuring water boiling time.
Lists factors that can influence the time it takes for water to boil.
Table correlating cooking zone diameter, wattage, water quantity, and maximum boil duration.
Details Miele branded cleaning products for ceramic and stainless steel hobs.
Description of the E-Cloth for removing finger marks and light soiling.
Information on how to contact Miele for faults or warranty service.
Guidance on locating and using the appliance's data plate for model and serial numbers.
Essential safety precautions to follow before and during hob installation.
Notes on fitting the appliance into the worktop and avoiding damage.
Specifies minimum vertical clearance required between the hob and cooker hood.
Details minimum horizontal clearances required around the hob for safety.
Minimum distances required when installing near walls with combustible niche cladding.
Diagram and measurements for installing the KM 5670 model into a worktop.
Diagram and measurements for installing the KM 5673 model into a worktop.
Instructions for preparing the worktop cut-out and sealing cut surfaces.
Guidance on fixing spring clamps for wooden and granite/marble worktops.
Steps for placing and securing the hob into the worktop and connecting to mains.
Instructions and warnings regarding the use of sealant during installation.
Details on electrical connection requirements, wiring colours, and safety advice.
Specific UK electrical connection details, voltage, frequency, and cable colours.
Emphasizes the critical requirement for proper earthing for electrical safety.
Schematic diagrams illustrating the electrical wiring connections for the appliance.
To Next Page
General
