Need help?Do you have a question about the Miele NOVOTRONIC T 1515 and is the answer not in the manual?
Details the pushbuttons (Door, ON/OFF, Buzzer, Load size, Start) and indicator lamps of the control panel.
Explains how to use the program selector knob for Cottons, Permanent Press, and Timed Drying.
Covers reading instructions, disposal of old machines, installation location, and suitable fabrics for drying.
Lists hazardous fabrics, warns about lint formation, fabric softeners, and electrical safety.
Information on the recycled materials used for packaging and their proper disposal.
Guidance on recycling old appliances and rendering them inoperative before disposal.
Instructions on how to load laundry loosely into the drum and fasten duvet covers.
Procedures for unloading laundry, checking the drum, cleaning the lint filter, and closing the door.
Lists fabrics like woollens, down-filled items, and pure linen that should not be tumble dried.
Explains dryer operation, static cling prevention, and why dryer sheets are not recommended.
Provides advice on drying knitted fabrics, starched laundry, permanent press items, and color separation.
Explains the sensor system, and the function of Door, ON/OFF, Buzzer, Load size, and Start buttons.
Details the 'PROGRAM SEQUENCE', 'DRYING STAGE REACHED' indicators and the 'PROGRAM SETTING' selector.
Step-by-step guides on selecting, starting, and changing drying programs, including cancellation conditions.
Steps to take after the drying cycle finishes, including setting to 'Finish' and cleaning the lint filter.
Details on 'Extra dry', 'Normal', 'Normal-*', 'Hand iron ۵۵', and 'Machine iron' programs for cotton fabrics.
Details on 'Normal +', 'Normal *', and 'Hand iron' programs for permanent press items.
Details on 'warm' and 'cool' timed drying settings for specific uses.
Instructions on how to clean the lint filter located in the door after each program.
Guidance on cleaning the exterior and drum of the dryer using mild detergents and soft cloths.
Troubleshooting for issues like the dryer failing to start or laundry not drying sufficiently.
Addresses causes for long drying times and remedies for a flashing 'anti-crease' indicator lamp.
Troubleshooting for the drum door opening during a cycle or the interior light failing.
Instructions on how to manually open the dryer door in the event of a power failure.
Information on how to contact your Miele Dealer or Service Department for assistance with problems.
Covers essential grounding procedures and electrical connection requirements for safe operation.
Information on using a specific kit for connecting the dryer to a 4-wire receptacle.
Guidance on selecting a location, considering ventilation, and leveling the machine using adjustable legs.
Details on venting moist air, avoiding restricted paths, and connecting exhaust ports.
Explains measuring duct length, accounting for bends, and determining effective duct length.
Shows duct diameter requirements and provides examples for venting calculations and kits.
Illustrates the components and installation of wall and window vent kits for dryer exhaust.
Diagrams illustrating ducting configurations, piping connections, and stack vent height.
Details electrical consumption and drying times for various cotton programs at different spin speeds.
Lists key dimensions, weight, drum volume, capacity, rated load, and fuse rating of the dryer.
Contact details for Miele's Canadian Head Office including address, phone, fax, and email.
Contact details for Miele's BC and Quebec Regional Sales Offices.
To Next Page
General
