Need help?Do you have a question about the Miele T 15xx and is the answer not in the manual?
Details the physical components and layout of vented and condenser dryer models.
Explains the function and layout of control panels for T 1515, T 1520, T 1526, T 1565 C, T 1570 C, T 1576 models.
Provides physical dimensions for 5kg vented, 5kg condenser, and 6kg vented models.
Identifies internal components and their locations for specific T 15xx models.
Details power supply and connection requirements for the dryer.
Instructions for connecting drain lines for condenser models.
Step-by-step guide for installing the appliance.
Basic operating steps for T 1515, T 1520, T 1526, T 1565 C, T 1570 C, and T 1576 models.
Explains control buttons and program options for T 15xx models.
Information on using and emptying the condensed-water drawer.
Instructions for cleaning and maintaining the heat exchanger.
Explains how vented and condenser dryers work and their airflow.
Details the fan motor assembly and its parts.
How the dryer uses moisture sensors to determine drying time.
Explains how temperature is monitored in the dryer for different models.
Details the heater bank assembly and its components.
Describes the functions and locations of control and power electronic modules.
Instructions for removing the dryer lid.
Procedures for opening the front panel on condenser and vented models.
Procedure for removing the power electronic module for different models.
Procedure for removing the control electronic module for different models.
How to access the heater relay bracket.
Steps to remove the rear panel of the drum.
Procedure to access the heater bank assembly.
Steps to remove the fan motor.
Procedures for removing the condenser assembly and condenser fan.
Procedure to remove the residual moisture sensor.
Instructions for removing and installing the drum drive belt.
How to access and navigate the service mode for diagnostics on various models.
How to retrieve and interpret fault codes, specifically for the T 1576.
How to access and use the programming mode for the T 1576.
Procedures to test the residual moisture sensing circuit for different models.
Solutions for common problems like long drying times, sensor inoperability, or door issues.
Solutions for water leaks, clicking sounds, unexpected shutdowns, or rumbling noises.
To Next Page
General