Miele T 8003 User Manual

NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 08262011
Product Dimensions
Large Capacity Vented Dryer
Angled control
T8003 / T8005
2"
23 1/2"
33 3/8" - 34 1/8"
22 1/2"
3 3/4" - 4 1/2"
21 1/2"
V
E
Notes
• All installations must be done in accordance with local codes
• See "Cut-out Dimensions" sheet for undercounter or built-in space requirements
E -
V-
208/240 Volt, 30 Amp 5 foot molded
plug power supply connects upper right
rear (NEMA 14-30 Configuration).
Venting location may be adjusted to
lower right or left side or lower left rear
(see separate sheet).
Location Codes

Miele T 8003 Specifications

General

Brand	Miele
Model	T 8003
Category	Dryer
Language	English

Summary

Product Dimensions - Vented Dryer T8003/T8005

Product Dimensions - Condenser Dryer T8013C

Product Dimensions - Decor Unit Dryer T8019Ci

Cut-out Dimensions - Built-in Installations

Product Dimensions - Laundry Stand WTS410

Product Dimensions - Stacked Washer & Dryer

Panel Information - T8019Ci Decor Unit

Version 1 - Thin Insert Panel

Details dimensions and specifications for thin insert panels on the decor unit.

Version 2 - Custom Front Panel

Details dimensions and specifications for custom front panels on the decor unit.

Hinge Notches

Information regarding required notches in the front panel to accommodate hinges.

Notch Pattern

Provides the specific drilling pattern for hinge notches in the front panel.

Vent Locations - Vented Dryers T8003, T8005

Vent Locations - Stacked Washer & Dryer