Panel Information
Integrated Laundry
T8019Ci Decor Unit
These units come equipped with a full size white front panel. These units are also designed to either accept a thin insert or
a custom front panel supplied by the custom cabinet maker.
Sizes are as follows:
Version 1 - Thin insert
Width: 23 1/4" for all machines
Thickness: up to 1/8"
Height: 25" in all cases
With this version, a thin white frame will be exposed after
installation
Version 2 - Custom Front Panel
Width: 23 3/8" for all machines
Thickness: up to 3/4"
Height: Up to 25"
With this version, the existing front panel is removed and
replaced by the new custom panel
Miele
Decor
Laundry unit
Hinge Notches
In certain installations, notches will be required to
accomodate the hinges in the front panel.
Miele
Decor
Laundry
Control
Panel
To center lines
16 3/4"
Notch Pattern
For this installation, drill the following
pattern in the appropriate locations.
Note: To insure access to customer servicable features,
a minimum 4" toe kick above finished floor (AFF)
is required.
3 7/8"
C
C
C
1 1/8"
7/8"
1/4" Ø
1/4" Ø
1"
1"
Drill all holes
to a 5/8" depth
1 3/8" Ø
NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 08262011
To Next Page
Loading...
Need help?
General