Poor cleaning results
Issue Possible fault Fix
The dishes are not
clean.
The dishes were not loaded
correctly.
See "Loading the
dishwasher".
The program was not
powerful enough.
Select a more intensive
program, see "Program
Guide".
Not enough detergent was
dispensed.
Use more detergent, see
"Adding detergent".
The spray arms are blocked
by items.
Turn the spray arm and
rearrange the dishes if
necessary.
The triple filter is clogged or
not correctly inserted. The
spray arm jets may be
clogged.
Clean the filter and insert
the filter correctly, see "User
Maintenance Instructions".
The drain pump or the
non-return valve is blocked.
Wash water will run back
into the wash cabinet.
Clean the drain pump and
the non-return valve, see
"User Maintenance
Instructions.
Glasses and cutlery
show streaks. There
is a bluish sheen on
the surface of
glasses and film that
can be wiped off.
The rinse aid dosage is set
too high.
Reduce the dosage, see
"Before using for the first
time".
Frequently asked questions
41
To Next Page
Loading...
