Preparing for use Ironing Selecting a temperature
Switch the flatwork ironer on by pressing the
On / Off button.
The "Finger guard" symbol will fl ash in the display.
Now activate the finger guard by lifting it.
The "Start" button begins to fl ash as soon as
the fl atwork ironer has reached the minimum
temperature.
Now press the flashing "Start" button to start up
the flatwork ironer.
Select the temperature according to the type
of fabric.
Fabric Symbol Temperature
Nylon / Artificial silk
100 - 110 °C
Silk / Woolens
111 - 150 °C
Cottons / Linens
151 - 185 °C
Selecting the ironer speed Laundry feed FlexControl foot switch
Select the roller speed you want.
Symbol Speed range
fi
Low speed range
fi fi
Medium speed range
fi fi fi
High speed range
Lay the item parallel to the roller at the start of
the laundry infeed table.
Smooth the item.
Feed the item into the machine.
During ironing, press down the "FlexControl"
foot switch to change to Steam mode.
Continuing ironing
Remove your foot from the foot switch to conti-
nue ironing.
Ironing with a coin-operated payment system
PM 1210, 1214, 1217 AU
Switch the flatwork ironer on by pressing the
"On / Off" button.
The symbol will fl ash in the display.
Insert the coin or token.
The symbol will go out in the display.
Select the temperature range according to the
type of laundry.
Select the roller speed you want.
Please read the instructions before installing and using this
machine and observe all warning and safety instructions.
en - AU M.-Nr. 101 09 940 /01
When the symbol goes out in the display,
the flatwork ironer is ready to operate and the
ironing time purchased will begin to count down.
Press the Start button to start the fl atwork ironer.
At the end of the ironing time, the heater plate
disengages, heating will switch off and the roller
comes to a standstill. The symbol fl ashes in
the display. More ironing time can be purchased
at any time.
To Previous Page
Loading...
Need help?
General
