Miele PIB 100 - User Manual

84 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Operating instructions

Commercial steam ironing system

To avoid the risk of accidents or damage to the appliance, it is es-

sential to read these instructions before it is installed and used for

the first time.

en-GB M.-Nr. 11 591 280

Table of Contents

Questions and Answers

F
Fred TurnerAug 9, 2025
What to do if my Miele PIB 100 says 'Unplug at mains'?
- G
  gturnerAug 9, 2025
  If your Miele Iron displays the message 'Unplug at mains' due to an electronic fault, switch it off at the wall socket and remove the plug. After a short wait, reinsert the plug and switch the iron back on. The system will attempt to correct the fault. If the message persists, switch off and unplug again, then contact Miele Service.
B
Barbara RamirezAug 25, 2025
What to do if Miele Iron shows 'Drain valve fault Switch off/on'?
- S
  Susan DunlapAug 25, 2025
  If your Miele Iron displays the message 'Drain valve fault Switch off/on' because the descaling or rinsing processes were not carried out properly, press the power button to switch the steam ironing system off and then back on again. If the fault message continues to be displayed, contact Miele Service.

Miele PIB 100 Specifications

General

Type	Steam Iron
Auto shut-off	Yes
Self-cleaning	Yes
Anti-drip system	Yes
Anti-calc system	Yes

Related product manuals

Preview: Miele HM 21-100

Miele HM 21-100

Preview: Miele PM 1217

Preview: Miele PM 1210

Preview: Miele PRI 210

Preview: Miele B 2312

Preview: Miele B 995 D

Preview: Miele HM 5316

Preview: Miele HM 16-83

Preview: Miele HM 29-175

Miele HM 29-175

Preview: Miele FashionMaster

Miele FashionMaster